Came VIVALDI TIMER TX1 (wall-mounted transmitter and timer 1 channel)

Transmitter/Timer 433.92 MHz, 1 channel, with wall mount.

Reference 001YE0115.

TECHNICAL SPECIFICATIONS A
KEY TO SYMBOLS
Sections to be read very carefully.
⚠ Sections concerning safety.
The number of “click-clacks” at the end of the sequence corresponds to the tilt movements performed by the motor, visually indicating that the procedure has been learned by the receiver. 2″ Time interval the button must be pressed.
DEFINITION
Single-channel transmitter timer 24 bit with 4,194,304 fixed code combinations for radio control of awning, blind and roller system automation compatible with the KLT series, includes display, with the ability to program a desired time for sending an opening command and a closing command.
DESCRIPTION B

1. Up: motor up control or value increase.
2. Stop: motor stop control or exit programming.
3. Down: motor down control or value decrease.
4. P key: enter programming.
5. Ok key: operation confirmation.
6. CAME logo key: mode change.
7. P2: Up + Stop simultaneously.
8. Display.
9. Single operating frequency.

MODE CHANGE C
Manual mode
The buttons control motor rotation. The timer function cannot be used.

Automatic mode

The buttons control motor rotation. The motor is controlled by the timer function.
Random mode
The buttons control motor rotation. The timer function controls the motor randomly within an interval of approximately plus or minus 15′ from the programmed time. The time interval between up and down in timer mode must be greater than 32′ or error messages ( ) will appear on the display and the system will exit programming mode.
CURRENT TIME PROGRAMMING D
LOCK PROCEDURE E
Proceed as shown in the figure.
Repeat the procedure to exit the lock function.
TIMER PROGRAMMING F
This operation programs the time for the opening
and closing command automatically ordered by the timer.
MEMORIZATION G, H
First Vivaldi Timer Tx1 memorization G

Shipped in 24/48 hours.